Search results for "best counterpoise system for horizontal end fed antennas"

THIS IS: The model MR4010 SuperWire Radial Set by Super Antenna. It is for all Super Antenna MP1 series portable HF-VHF antenna systems, as well as all other types and brands of vertical antennas. Made by Super Antenna, designed as part of the /backpack /base /travel /mobile /portable antenna system for Ham Radio. It is for transmitting and receiving on HF radio frequencies.

SPECIFICATIONS: BANDS: Pre-tuned wires for optimum signal on the bands 40m (7MHz),20m (14MHz), 15m (21MHz), 12m-10m (24MHz-29MHz). Also covers other bands in between with MP1 series Super Antennas. FREQUENCY RANGE: Covers 7 MHz to 29 MHz. Also covers CAP, MARS, Marine, shortwave CB + HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: adds about +4.5dB over a typical ground rod.

COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on Quick Disconnect connector to Super Antenna mounts (mount not included, sold separately). Deploys in a few minutes by one person with no tools needed. Compatible with most other types and brands of vertical antennas and ground planes. Has push-on connectors.

SIZE: Packs down to about 6"x6" hank for portability. Extends and fans out to single full size pre-tuned quarter-wave wires on each band. WIRE: Proprietary SuperWire 18AWG multi-strand Stealth wire. Insulated flexible jacket. LENGTH: Max wire length: 33.5 feet (40m 7MHz). CONNECTOR: Standard Quick Disconnect push-on 1/4-inch (6mm) female terminal, with spare mating terminal and screw for each radial set added. Includes FF1 Frequency Flag wire markers for marking your radial sets.

MAX POWER RATING: 500W SSB, 300W CW/DATA. COLOR: Stealth Black. WEIGHT: less than a pound. CONTENTS: Super Antenna SuperWire Radial Set model MR4010. ==THIS IS NOT AN ANTENNA. IT IS ONLY A SET OF RADIAL WIRES FOR AN ANTENNA. ==

THIS IS: The model MS135 SuperWire by Super Antenna. Designed for ham radio portable antennas, ground radials, SDR, Shortwave, FM radio, AM radio, etc.

LENGTH: 135 feet (41 meters long) , Bulk roll hank of wire without spool. Excellent for crimping or soldering.

CONDUCTOR: Wire #18 AWG (1.1 mm) diameter, multi-strand, tinned Copper. Conductor diameter 0.0433" (1.1mm) . Outer jacket diameter 0.06" (1.5mm) . RF POWER: Maximum 500 Watts SSB 300 Watts CW/DATA.

MATERIALS: Outer jacket tough PTFE insulation. COLOR: Black matte Stealth anti-reflective, Low-Viz (Low Visibility). Waterproof. Weatherproof. UV-resistant.

HANDLING: Highly flexible and slippery outer jacket surface tangle resistant in the field for portable use. SuperWire by Super Antenna is excellent for making your own portable antennas and radial sets. WEIGHT: Total 12 ounces.

1 X CHA EMCOMM III matching box

1 X 73' Copper Clad KEVLAR Wire (-70°C to 150°C) (Radiator)

1 X 25' Copper Clad KEVLAR Wire (-70°C to 150°C) (Counterpoise)

10M to 160M

1. full-size half-wave dipole antenna level , the classic high efficiency antenna.

2. fully waterproof Carbon Wei Balun

3. Common quad-band (5/7/14/21/28-29/50MHz) mark , with the bobbin easily adjust the switching frequency

4. special canvas pouch , the volume is very small, very easy to Portable

5:Gross Weight: 0.4kg Will ship it via fast shipping that you can get it within 13-17days.

THIS IS: The Deluxe Tripod Super Antenna, top-of-the-line setup, with All HF Bands 80m-6m and simultaneous VHF 2 meter. Ruggedized version MP1 SUPER ANTENNA, 2 METER ADAPTER, LARGE TRIPOD, GROUND SPIKE MOUNT, TITANIUM SUPER-WHIP, 80 & 60 METER COILs, GO BAGS. #1 HF Portable Vertical Antenna worldwide. Package includes entire emergency communications /portable /backpack /base /travel antenna system for Ham Radio. Operators who demand top performance choose MP1LXMAX for transmitting/receiving.

FREQUENCIES: ALL BANDS 80m, 75m, 60m, 40m, 30m, 20m, 17m, 15m, 12m, 11m, 10m, 6m, meters (3.5MHz to 30MHz tuning) plus simultaneous 2 meters (144 to 148 MHz) with a good SWR. Continuously tunes all frequencies Marine, Government, NGO, CAP, MARS, EmComm, Shortwave, CB, and everything in between. TUNING METHOD: Antenna tunes by calibrated manual slip of the SuperSlider Coil grip, with no need for external power, separate antenna tuner, or analyzer.

Perfect for vacation, field days, and backyard. PACKAGE CONTENTS: MP1C Super Antenna + MC2 SuperPlexer 2 meter adapter + SW1 Titanium SuperWhip + TM4 Large Deluxe Tripod + UM3 SuperMount + SP3 SuperSpike + MC80 Coil + MC60 Coil + FG1 SWR Ruler + GB2 Go Bag + GB4 Go Bag + Includes All Necessary Radial Sets: MR4010, MR8075, MR6060, MR642, MR2Y. Everything collapses down to pack into the stealth black Go Bag zip cases, with internal velcro pockets.

SIZE: Total extended height 12 feet (3.7m). Antenna Collapsed Size: 12" (30cm). Tripod Collapsed Size: 25" (64cm). Go Bag Size: 13"x9"x3.5" (33x23x9cm). Power Rating: 500W SSB, 300W CW/DATA. EFFICIENCY: Within 1dB of a full size quarter-wave vertical antenna on 20 meters (as measured by HFpack Shootout). COMPATIBILITY: Fully compatible with all Amateur Radio transceivers. CONNECTOR: SO-239 (PL259 compatible 50 ohms). FILLED ANTENNA GO BAG: 4.8 pounds (2kg) FILLED TRIPOD GO BAG: 3 pounds (1.4kg) loaded weight.

FEATURES: New type of Dual Band HF + plus 2 meters antenna, with the MC2 SuperPlexer 2 meter adapter. The durable SuperWhip is an indestructible Titanium metal alloy, so flexible that it can be rolled up in an 12 inch diameter circle and stowed on the GB2 Go Bag. The TM4 Large Deluxe Tripod sets up on any surface. The UM3 SuperMount can also be used with the included SP3 SuperSpike for quick low-profile setup on the ground, lawn, or sand. Antenna requires manual HF tuning using included SuperSlider.

300 watts

Poly-Stealth 18 wire

Unun wound with #20 tinned PTFE wire

10/12/15/17/20/30/40/80 Meters HF Vertical Base Station Antenna

Construction: Aluminum

Max Power: 1500 Watts PEP

Connector: Lug

The single-band 80m-10m end-feed half-wave linear antenna provides the antenna. It is designed as a highly portable wired antenna that can be easily set as an inverted V-shaped, horizontal, tilted, or vertical radiator (at higher frequencies).

Your feeder is inherently balanced, so no separate feeder is required. The high-impedance half-wave line is matched to your 50-ohm feed point through an integrated impedance-matching toroidal transformer with a rated power of 10 watts.

Use a high-voltage capacitor on the primary of the transformer with a specific radiator length to further expand and reduce the SWR within the range of 80m-10m.

It is designed to be used without the use of a tuner, and after optimizing the driven element, SWR ≤ 1.2 for any part of the frequency band.

Package Included: 1 x Portable No Tune End Fed Half Wave Antenna