Search results for "best handheld cb radio antennas"

27Mhz Telescopic/Rod Portable Antenna; Connector: BNC; Gain:1.8dbi;

Maximum Power Input-watts:20W (Handheld Portable CB radio less than 20W);

Length Approx: 23cm(9inch)-130cm(51inch), different antenna length, the antenna effect is different.

27Mhz Antenna working for Hand Held CB radios Cobra, Midland, Macon, and Radio Shack with a BNC Connector.

Working for model number: for Cobra HH50WXST HH50 MRHH350FLT C75WXST; for Midland 75-822 75-785 MHS75; for Uniden BC75XLT PRO401HH BC125AT.

Excellent Perfomance：Range of up to 10 miles for all Marine Band Car Home radio frequencies

Advantage：Flexible mast, 180-degrees Swivel base for maximum mobility

Portable installation：Angled mounting options allow you to install the antenna in the most convenient locations

Corrosion Resistant：Corrosion resistant for the marine environment

Dimensions：included 16.9 inch mast,55 inch cable

[Frequency range: 26-29MHz] The central frequency point is 27.5mhz, The antenna has the best performance in 27.5mhz under normal circumstances.

[9.45inch cb Rubber duck Antenna] Rubber material, free to bend, not easily deformation for use with Portable Handheld cb Band Radios.

Connector: BNC (If you need TNC antenna,please check B0BFQ9XLBM); Maximum Power Input-watts:10W (Ham cb radio less than 10W); Gain:1.5dBi; Impedance: 50ohm

27Mhz Antenna working for Cobra, Midland, Uniden Hand Held cb radios .

[Compatible with]Cobra HH50WXST HH50 C75WXST HHRT50; for Midland 75-822 75-785 MHS75; for Uniden BC75XLT PRO401HH PRO501TK BC125AT PRO501HH.

Compatible with CB radios from many brands, improve quality and range to CB radio reception. The antenna design is portable, lightweight and durable, works on all channel within CB radio frequency range of 26MHz to 28 MHz.

Heavy Duty Magnetic Mounting; Easy to be installed on the roof, hood or trunk of vehicles and trucks, and will not scratch.

Working Frequency: 27MHz; Max Input Power: 30W; Cable Type: 3m / 10 feet RG58/U Coaxial Cable; Antenna Height: 13 inch / 33cm; Weight: 480g;

Cable Connector Type: PL-259 Male Connector; Accessoried with BNC Male to SO-239 Female Connector Adapter; Compatible with Mobile CB Radios and Handheld CB Radios;

Package List: 1 x Antenna, 1 x Connector Adapter (As the Picture Shown);

【New Version CB Radio Antenna】The length is shorter and the signal is better. The new version CB radio antenna constructed by high quality and durable material. It can greatly improve the CB radio reception！

【Compatible with】Compatible with CB radios from many brands,such as President Midland Cobra Uniden Anytone CB Radio and other brands.To see more compatible information, please seach in the description page.

【Heavy Duty Magnetic Base】Heavy duty magnetic mounting, it can easy to be installed on the roof, hood or trunk of vehicles and trucks, and will not scratch.

【Further Information】Working Frequency: 27MHz , Max Input Power: 30W , Cable Type: 3m / 10 feet RG58/U Coaxial Cable , Cable Connector Type: PL-259 Male Connector , Accessoried with BNC Male to SO-239 Female Connector Adapter.

【Warranty】Simple and convenient return process. 100% satisfaction guaranteed. Warranty would be valid for 12 months.

LONG ANTENNA - Taller Antennas = Better Range! 28 Inch long for ultimate range & receiving!

FULL KIT - includes magnet mount with pre-intalled 10ft of coaxial cable, coil load, and stainless steel whip.

Magnetic base - Improve reception by harnessing large metal surfaces.

Weather Channel Capable, Covers all CB frequencies.

Warranty would be valid for 12 months against manufacturing defect.

Compatible with all handheld CB radios from many brand with a BNC connector, improve quality and range to CB radio reception. The antenna design is soft, flexible and durable, works on all channel within CB radio frequency range of 26MHz to 27 MHz.

Max Input Power: 30W; Frequency: 27MHz; Antenna Mounting Connector Type: BNC Male Connector; Length: 9.9 inch / 25cm; Weight: 420g;

Feature: with Magnetic Base; Cable Type: RG58/U Coaxial Cable; Cable Length: 3m / 10 feet; Cable Connector Type: BNC Male Connector; Accessories: UHF PL-259 Male Connector Adapter;

Package List: 1 x Antenna, 1 x Magnetic Base, 1 x Connector Adapter (As the Picture Shown);

Compatible with Handheld CB Radios: Uniden PRO401HH PRO501HH PC88LTX, Cobra HH50WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C;

[ELECTRICAL SPECIFICATIONS]Frequency: 27MHz; VSWR: ＜1.5; Gain: 1.8dBi; Maximum Power Input-watts: 20W; Impedance:50Ω

[MECHANICAL SPECIFICATIONS] Termination: TNC male(not BNC); Material: Stainless steel; Height: 9”(23cm)/ 51”(130cm) full extended; Weight: 0.08kg

Compact and durable design, the threaded TNC connection makes the antenna more firmly mounted on the radio; high quality metal materials which is better for receive and transmit

[Excellent Signal boost] Significantly boosting the signal of your radio,extend the talk distance; This is a good choice as an upgrade to the original rubber antenna

Compatible for CB radios model: For President Randy FCC, Randy II FCC, Randy III, Stabo XH9006e, etc. Note: Please confirm your radio model and antenna connector before purchase, This antenna fit cb radios with TNC connector, if you need BNC antenna, please check another one(B095CTK2XQ)

*Frequency: 20-1300MHz

*Max Power:10W

*Length: 16.6 cm=6.54 inch (retracted)/60.4 cm=23.78 inch (full use)

*BNC Male connector